Tie Snake

Materials:

Old ties

Poly-Fill stuffing

Wiggly eyes

Glue

Wire hanger

Instructions:
1. If you would like your snake to be bendable, straighten out a wire hanger or use some other type of wire. Make sure you fold down the ends of the wire with some needle nose pliers so that the edges are very smooth. Insert the hanger into the tie.
2.   Stuff the tie with poly-fill from each end of the snake.
3. Glue or sew the tail end of the snake closed.
4. Push some stuffing up into the point of the snake’s head (the wider end of the tie).  Glue the end closed and glue on some wiggly eyes to finish.