Sleigh Centerpiece
 

Click and Print

 
 
Materials Needed
3/16" or ¼" plywood, or ½" pine
Jig saw or coping saw
Paper and carbon paper
Acrylic or lacquer paints
¾" wire nails
White Glue
Sandpaper
Directions
  1. Click image above for template. Cut two of these for the sides.
  2. Trace the design onto white paper, increasing or decreasing image size.
  3. Transfer the image to the wood using carbon paper.
  4. Use a jig saw or coping saw to cut the pattern out.
  5. Sand all the cut edges carefully.
  6. Using the illustrations below, cut your front and back piece according to drawing.
  7. Sand lightly to smooth edges.
  8. Attach front and back between the sides and using the ¾" wire nails and glue, put sled together.
  9. Paint as you wish.
 

   Pattern Below