Sea Creature Wind Mobile

Materials:

Pipe cleaner

Beads

Foam paper

Foam sea creature cutouts (come in a package already cut)

Scissors

Hole punch

String

Instructions:
1. Cut out a 6” circle from a piece of fun foam.  Cut in a circular direction around the circle until you come to the middle.  Punch a hole in the top (inside of the circle) and two holes at the bottom (outside of the circle) as shown in the picture.
2. Bend the very bottom of the pipe cleaner into a loop and then push the top of the pipe cleaner through the two holes at the bottom.
3. Punch two holes in your fun foam sea creature one on top of the other and feed the pipe cleaner through the holes.  (Make sure the sea creature is not upside down.)
4. Now string on some pretty beads.
5. When you have all the beads on the pipe cleaner you want put the pipe cleaner through the other hole of the cut fun foam.
7. Bend this end of the pipe cleaner in a loop and tie a string to hang the mobile to the loop.
8. Tie a string to the bottom loop of the mobile and string some beads onto the string.
9. Tie a knot at the bottom to finish.