Everyone should have at least one of these wide topped sawhorses in fact many times only one is needed when working with short lengths. Besides being a mini workbench you can stand on it and best of all sit on it.

The top could even be extended to a 2X8 instead of the 2X6, just use a 2X4 for the 26" long support piece and add an inch to the length of the two end braces.

Trim both edges of the 26" long support piece to 15° angles, then fasten it to bottom of top with glue and wood screws.

Fasten legs to support even with the end using glue and screws , then fasten brace to legs.