Dried Flower Holder
Knock together this dried flower holder, use standard size 3/4" thick cedar fence boards and decorate it with a length of sisal twine. Parts
Cut two 12" lengths from the cedar fence board, rip them in half, then rip them to 2 1/2" wide, cut the base to size from the remainder of the board, sand the ends and sides and surfaces of all pieces. Assembly
Finish with danish oil and wrap twine around column.
|
Material Needed 3' long 1x6 cedar fence board 1 1/2" (4d) finishing nails Glue Danish oil Length of twine
|