A Slice of the Sea

 

Instructions
 
Product Note
Napkin Décor features ultra-thin designer napkins and DecoArt Mediums, a combination that makes it easy to achieve a hand-painted look on a variety of surfaces.

Painting Instructions
1. Using 1" flat brush, paint all terra cotta pots Larkspur Blue, both inside and out, including the drain hole.

2. Mix each of the following colors 1:1 with Clear Coat: Hydrangea Blue, Deep Waterfall Blue and Cloud White. Randomly load the brush with the three colors and apply the water area.

3. Cut designs from napkins and separate printed ply from the rest of the napkin.

4. Place designs on pots and trace around them with a pencil. Remove and paint these areas Cloud White and #12 flat brush. Let dry.

5. Apply Clear Coat to areas where designs will go. Adhere napkin design to wet surface and apply another layer of Clear Coat, brushing from the center to eliminate wrinkles and bubbles.

6. Add clouds with sponge and Cloud White. Paint birds with Wrought Iron Black and #1 liner.

7. Glue 8" pot to bottom of 6" saucer. Apply Outdoor Snow with palette knife around saucer and bottom of pot. Let dry, then paint Antique Mum.

8. Apply Clear Coat to all surfaces.

Note: It is recommended that Napkin Décor terra cotta pots be used indoors for decorative purposes, and have a liner to keep the surface dry, as moisture could cause damage to the napkin design.